Prior Manufacturer Configuration - Airzone Aidoo Pro AZAI6WSPHI4 Kurzanleitung

PRIOR MANUFACTURER CONFIGURATION

From the default configuration, the unit must be configured to work in water flow temperature
mode. The unit must be configured as follows in order to function correctly:
1.
Advanced Configuration > Controller Type > Unit.
EN
2.
Select the circuits controlled by the device: (C1), (C2) or (C1 + C2).
3. Configure the circuits to be used in Heating as "Fix". Indicate whether DHW is available.
4.
Configure the circuits to be used in Cooling as "Fix".
5. Configure the "Central Mode" as "Full".
Note: The unit may need to be restarted after performing the configuration.
In Cooling mode, supply temperatures must be set to a maximum of 22°C and a minimum of
5°C: System Configuration > Space Cooling > Circuit 1 > Working limits.
10