Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Updating the OS and Resources
Introduction
The procedure described in this document allows you to in-
stall the operating system and the original musical resourc-
es in the instrument's internal memory, by loading the OS
and Resources file from an USB storage device.
The most up-to-date version of the OS and Resources file
can be downloaded from our web site (www.korg.com).
Note: By loading the new operating system, you also load
all the features added by the previous updates.
Note: Loading this file may take up to forty minutes. Please
do not turn the instrument off before the loading operation
has been completed!
Making a safety copy of your data
Loading this file will modify your Factory and User data, so
please make a safety copy of your data before proceeding.
Warning: Please don't use the
tion to save your User data, nor the
tion after loading the operating system, because restoring
the older data would overwrite the newer one.
• To save all User data, use the
• In case there are custom Factory data in the internal
memory, go to the
Global > Mode Preferences > Media
and remove protection from the Factory data; then use the
Media > Save
procedures to save single banks or items.
• In case there are custom Factory Sounds in the internal
memory, go to the
Sound Select
to a User location. Then save them as any other User data.
See the chapter dedicated to file management in the User's
Manual for more information.
Loading the OS and Resources file
Here is how to load the OS and Resources file into your
instrument.
1.
If it is on, keep the
one second to turn the instrument off. Then keep the
TRO 1
button pressed, and press the
the instrument on again.
2.
Keep the
INTRO 1
button pressed, until the
Calibration
page appears: this will confirm that the system
loading procedure has been started. Execute the display
calibration by touching the red cross wherever it appears.
Full Resource Backup
Resource Restore
Media > Save All
procedure.
window, and copy them
POWER
button pressed for about
POWER
button to turn
Touch Panel
3.
A message will appear, asking you to select either a
.pkg or an .upd operating system file. Download the file
from our web site.
4.
Unzip the OS and Resources file from its .zip archive,
and copy the resulting .pkg/.upd files to an USB storage
device. The OS and Resources file is split into more .pkg/.
upd files (for example, FILENAME.PKG.001, FILENAME.PKG.
OO2, and so on). Be sure they are kept in the same folder.
5.
Connect the USB storage device where you copied the
system file to the
ton in the display to close the dialog.
6.
When a file selector appears, use the
up menu (in the lower left side of the display) to choose
the device connected to the
first OS and Resources .pkg/.upd file (for example, FILE-
NAME.PKG.001) to select it. Then touch the
on the display to confirm loading. The instrument will take
some time to validate the files.
func-
func-
page
Device pop-up menu
7.
A dialog will appear, asking you to choose an operation
or to cancel it. Touch the
the system loading procedure.
IN-
8.
After you choice, a warning will appear, asking for con-
firmation. Touch the
Warning: Confirming will delete all data from the internal
memory. See above for instructions on how to make a safe-
ty copy of your data.
1
USB HOST
port, then touch the
USB HOST
port. Touch the
File selector
Format & Reset
button to confirm
OK
button to continue.
OK
but-
Device
pop-
Select
button
Werbung
