Setup - Danfoss CF-RC Benutzerinstruktion

Instruction CF-RC Remote Controller
Setback temperature
In the Setback program (see 5.2.2), activate the Setback temperature
menu to set the room temperature reduction from  to 0°C during
setback periods.

5.3 Setup

From the start-up screen, activate the:
Setup menu with access to a variety of information and setting possi-
bilities for the Remote Controller as well as the entire CF2 system.
Note: As some of the setting possibilities in the Setup menu can affect the
configuration of the CF2 system, and thus also the functioning of the entire
application in general, they should be handled with caution
Languages:
Here you can choose another language than the one selected during
the installation process (see 2).
Date and time:
Provides access to the setting of the date and time. Furthermore, this
menu includes the settings for and activation of the summertime pro-
gram. This enables you to configure at what day, week and month the
summertime begins and ends.
6
VI.UH.M3.80
Menu
Setup
Produced by Danfoss Floor Heating Hydronics 02.2006