Setup - Danfoss 088U0220 Instruktion

Instruction CF-RC Remote Controller
Setback temperature
In the Setback program (see chapter 5.2.2), activate the Setback tempera-
ture menu to set the room temperature reduction from  to 0°C during
setback periods.

5.3 Setup

From the start-up screen, activate the:
Setup menu with access to a variety of information and setting possibilities
for the Remote Controller as well as the entire CF2 system.
Note: As some of the setting possibilities in the Setup menu can affect the configuration
of the CF2 system, and thus also the functioning of the entire application in general, they
should be handled with caution
Languages:
Here you can choose another language than the one selected during the
installation process (see chapter 2).
Date and time:
Provides access to the setting of the date and time. Furthermore, this menu
includes the settings for and activation of the summertime program. This enables
you to configure at what day, week and month the summertime begins and ends.
Alarm:
From this menu, you can switch the Buzzer of the Master Controller (MC)
On/Off. The sound only occurs in case of an alarm, also indicated by the red
alarm LED on the Master Controller (see fig. 3-
get specific information about the error causing the alarm and the time for its
VI.UH.M4.1C
Menu
Setup
Produced by Danfoss Floor Heating Hydronics 03.2007
). In the Alarm log, you can
GB
3