Program - Danfoss CF-RC Benutzerinstruktion

Instruction CF-RC Remote Controller
Cooling:
Here you can disable the cooling function for the room in question*
* Only available when the Master Controller is in cooling mode

5.2 Program

From the start-up screen, activate the:
Menu
Program
Program menu to view the two time programming options:
5.2.1 Period program:
With this program, you can set the room temperature for all Room
Thermostats during e.g. a holiday. The start and end date for the pro-
gram is easily set in a calendar by means of the up/down and left/right
selectors (fig. - / ) and by confirming each setting with OK. The
room temperature and the duration of the period program are illus-
trated and finally activated from a detailed overview for the created
program:

VI.UH.M3.80
Produced by Danfoss Floor Heating Hydronics 02.2006