Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
36
Replacing the light
•
The light may only be replaced by a qualifi ed electrician.
•
Before opening the device, unplug all power connections.
•
Always allow the light to cool down before replacing it.
•
Always use gloves or a cloth to avoid direct contact with your hands. Direct
contact can shorten the life of the light.
a) Replacing E14 bulb
1.
Switch off the device immediately and pull the power plug out.
2.
Remove the light cover by unscrewing the 2 screws.
3.
Unscrew the light bulb.
4.
Replace with a bulb of the same type and wattage.
b) Replacing the LED light:
1.
Switch off the device immediately and pull the power plug out.
2.
Allow the light to cool down before removing it.
3.
Locate the location of the lamp brackets.
On some models you need to remove the grease fi lter to fi nd the lamp
brackets. On some other models, the lamp holders are concealed by the light
strip. Unscrew the light strip before replacing.
4.
Remove the screws on the LED board and the brackets, disconnect the wiring
of the light and carefully insert the new light.
Werbung
