Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Carrying
Carry load with both hands as close to body as possible.
Carry load with straight back.
Always secure the assembled
damage to the product.
ASSEMBLY
13.1
Preparatory activities
13.1.1
Checking delivery content
Always note visible transport damage on the delivery note and check the product immediately
after unpacking for transport damage or missing or damaged parts. Report any damage to the
product or missing parts immediately to your retailer or freight forwarder.
13.2
Assembling the product
The product has been disassembled for transport and must be assembled before use. Follow the
instructions in the chapter ASSEMBLY INSTRUCTION.
The ground for installing the product must be designed in such a way that it can bear
the load. The minimum load values here are the maximum loads + self-weight
according to the technical data for the respective component.
Tighten all screws after completing the assembly
CLEANING
Wrong cleaning agents can attack the varnish of the product. Do not use solvents,
nitro thinners, or other cleaning agents that could damage the product's paint.
Observe the information and instructions of the cleaning agent manufacturer!
Regular cleaning is a prerequisite for the safe operation of the product and its long service life.
Therefore, remove dust and abrasion regularly with a soft, lint-free (cotton) cloth, otherwise the
hydraulic piston may wear prematurely.
DISPOSAL
Observe the national waste disposal regulations. Never dispose the product,
product components or equipment in residual waste. If necessary, contact
your local authorities for information on the disposal options available.
If you buy a new product or an equivalent device from your specialist dealer,
he is obliged in certain countries to dispose of your old product properly.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
product
during transport in the transport position to prevent
C A U T I O N
N O T I C E
N O T I C E
ASSEMBLY
19
WT06
Werbung
