Kenwood NEXEDGE NX-700 Bedienungsanleitung Seite 17

Many functions on this transceiver are selected or confi gured through the Menu
instead of physical controls. Once you become familiar with the Menu system,
you will appreciate the versatility it offers.
MENU ACCESS
1 Press the key programmed as Menu.
2 Press / to select a Menu item.
• If you are using a microphone keypad, you can enter a Menu number directly.
3 Press to set up the selected Menu item.
4 Press / to select your desired setting.
• For settings with more than 1 level, repeat steps 3 and 4.
5 Press to set the selected setting and exit Menu mode.
• Press at any time to return to the previous display.
• Press at any time to exit Menu mode.
MENU CONFIGURATION
Some transceiver keys may already be programmed with functions listed in the
Menu. Those functions can be accessed directly by pressing the key. All other
functions can still be accessed using the transceiver Menu. The following table
lists the available Menu items.
Menu
2-TONE
AUTO REPLY MSG
AUTO TELEPHONE
AUTO DIAL
AUTO DIAL PROG
AUX A
AUX B
BROADCAST
CLOCK
CLOCK ADJUST
DIRECT CH1 SEL
DISP FORMAT
FIXED VOLUME
FORCED SEARCH
GPS POS DISP
GROUP
GROUP+STATUS
MENU MODE
2-tone Mode
Auto Reply Message ON/OFF
Auto Telephone
Autodial Mode
Autodial Programming Mode
AUX A ON/OFF
AUX B ON/OFF
Broadcast ON/OFF
Clock ON/OFF
Clock Adjustment mode
Direct CH/GID 1 ~ 5 Select
Display Format ON/OFF
Fixed Volume
Forced Search
GPS Position Display mode
Group mode
Group + Status mode
Description
9