Therabody TheraCup Anleitung Seite 5

Step 2 - Discover Pro Mode treatment
1. Select the cup size (small, medium, large) best suited for the area you want to use TheraCup™. See below for more information
on how to select the appropriate cup size. Ensure contact between the cup and the black ring on the device for sealing.
2. Once comfortable, turn ON TheraCup™ by dragging the MasterSwitch slider to the right. The battery status LED shows that
the device is ON.
3. There are two ways to use Pro Mode: Flash Cupping and Gliding Cupping.
4. Long press the vibration and heat buttons simultaneously for approximately five seconds to reach Pro Mode. Two white lights
will illuminate when Pro Mode is on, and the device will begin to suction. Suction levels are not adjustable in Pro Mode. The
default setting in Pro Mode is Gliding Cupping. To access Flash Cupping, press the suction (center button). Three white lights
will illuminate to indicate that Flash Cupping mode is on.
5. Short press the vibration button to turn ON the vibration. Short press the vibration button to toggle through the speed
settings. A long press turns off the treatment.
6. Short press the heat button to turn ON the heat treatment. Short press the heat button to toggle through the three
temperatures. A long press stops the treatment.
7. Gliding mode: Apply a massage medium, such as an oil or lotion, to the intended treatment area. Place the cup on the
intended area, such as IT bands, quads, and calves. Once the cup has full suction, lightly lift the cup up and away from the skin,
slowly gliding over the treatment area.
8. Flash cupping mode: Place the cup on the intended area, such as IT bands, quads, and calves. Allow the pressure to build up
for 2-5 seconds, and then pull to release the cup. When using the smaller cup, release after about two seconds. When using
the larger cup, release after about five seconds.
9. After five minutes, you will hear a short beep, indicating that TheraCup™ treatment is complete. Five seconds after the beep,
the suction will stop.
10. To turn OFF TheraCup™ during or after treatment, drag the MasterSwitch slider to the left.
EN
5