Therabody TheraCup Anleitung Seite 4

EN
Getting started
Step 1 - Use cupping technology
1. Select the cup size (small, medium, large) best suited for the area you want to use TheraCup™. See below for
more information on how to select the appropriate cup size. Ensure contact between the cup and the black ring
on the device for sealing.
2. Once comfortable, turn ON TheraCup™ by dragging the MasterSwitch slider to the right. The battery status
LED shows that the device is ON.
3. Short press the suction (middle) button to begin cupping. Short press the suction button to toggle through the
pressure settings (low, medium, high). Turning on the suction also turns on the first level of heat and vibration.
4. Place the cup on your forearm to adjust settings accordingly before use, or place directly on the intended area,
such as your back, arms, and legs and begin use. Once placed, push the cup into the skin for strong suction.
Once suctioned, you can release your grip during the treatment.
5. Short press the vibration button to toggle through the speed settings. A long press turns off the treatment.
6. Short press the heat button to toggle through the three temperatures. A long press turns off the treatment.
7. After three minutes, you will hear a short beep, indicating that TheraCup™ treatment is complete. Five seconds
after the beep, the suction will stop. If you want to discontinue treatment at any point, long press the suction
(middle) button or drag the MasterSwitch slider to the left (off).
8. To turn OFF TheraCup™, drag the MasterSwitch slider to the left.
4