Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Installing and connecting the
main circuits
If necessary, adjust the adapter to 10mm busbars
CAUTION: Never carry out work when the voltage is connected.
Danger of death!
Lock the complete module including the busbar adapter
to the rails.
The electrical connection to the 3-phase mains is made
direct using the adapter.
26
5. Dismantling
CAUTION: Never carry out work when the voltage
is connected. Isolate the system before dismantling.
First of all remove the electronic part from the
busbar adapter.
1.
2.
Replacing a fuse
The fuses are designed so that they only require
replacement after they have been damaged.
1.
2.
3.
Revision 0, stand 05.2016
English.
4.
5.
The following coordination types are achieved using
the fuses:
32A gG
30 kA, 400 V, coordination type 1 system protection
30A Class CC
30 kA, 480 V, coordination type 1 system protection
27
Werbung
