Black & Decker Mouse KA150 Bedienungsanleitung Seite 23

As a general rule, start with a coarse grit and
gradually change to a fine grit for the final finish.
• Do not use this product with liquid polishes.
• Always keep the air cooling vents on the motor
housing clear.
To clean your Mouse, proceed as follows:
• Disconnect the plug from the electricity supply.
• Use a clean dry paint brush to clear vents and ducts.
• Clean the housing using a clean damp cloth (do not
use solvents, petrol or turpentine).
APPLICATION AND ACCESSORY MATRIX
Accessory Recommended application
and use
Coarse grit sandpaper Fast paint, varnish and rust
removal
Medium grit sandpaper Paint, varnish and rust removal
Fine grit sandpaper Surface blending and finishing
Extra fine grit paper Sanding between coats
Detail sanding tips Corners and hard to reach
places
1 OT polishing/ Polishing metals, stripping
stripping wool varnish and glass cleaning
4 OT fine polishing Fine polishing, satin finish on
wool paint and varnish
Grey foam pad Applying and removing polish
Red non-woven pad Heavy scrubbing and rust
removal
Grey abrasive paper Polishing plastics
EC DECLARATION OF CONFORMITY
We declare that units: KA150/KA150K conform to
98/37/EC, 89/336/EEC, EN55014-01, EN55014-02,
73/23/EEC, EN50144
A weighted sound pressure 66dB (A)
A weighted sound power 79dB (A)
Hand/arm weighted vibration <2.5m/s
Brian Cooke - Director of Engineering
Black & Decker Ltd, Spennymoor, County Durham
DL16 6JG United Kingdom
The Black & Decker policy is one of continuous
improvement to our product and as such we reserve
the right to change the product specification without
prior notice.
KA150K ML p19-33
2
23
ENGLISH
21-09-2000, 13:56
23