Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switching off
When switching the lamp
OFF button
on the remote control
5
When switching the lamp
ON button
, the last colour or the last se-
6
lected colour changing mode will be resumed.
However, if the power supply of the lamp
was disconnected, for example, switch off
by electrical / mechanical switch, or take
out the lamp from the lamp socket, etc.
Then, even the power resume and switch on
the lamp
again by remote control
1
will only light up in white color at medium
bright level.
Changing the battery
Change the battery
the remote control
or the lamp
no longer responds to the
1
remote control
2
To do so, proceed as shown in Figure B.
Only use a battery type CR2025 and note
the correct polarity when inserting the
battery. This is shown on the back of the
remote control
2
20 GB/IE
off, using the
1
2
on, using the
1
2
when the range of
16
noticeably decreases
2
being operated.
.
Cleaning and Care
.
SHOCK! For electrical safety, never clean the
product with water or other liquids, or immerse
it in water.
Remove the lamp
1
ture or lamp socket before cleaning it. When
doing so, please follow the instructions of
the lighting fixture being used.
Clean the lamp
, it
control
2
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Observe the marking of the packag-
ing materials for waste separation,
b
a
which are marked with abbreviations
(a) and numbers (b) with following
meaning: 1–7: plastics / 20–22:
paper and fibreboard / 80–98:
composite materials.
DANGER OF ELECTRIC
from the lighting fix-
1
and the remote
1
with a dry, lint-free cloth.
Werbung
