Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Press the ON button
control to switch the product on (Fig. A).
Note: Please note the remote control uses
infrared lamp: it does not allow the signal
to be transmitted "around the corner" as
radio waves do. Light-tight objects may not
be located between the diode
lamp
.
1
The lamp
will now light up white.
1
Operation
Select a light colour or different colour change
effects using the remote control
Selecting the light colour
Press one of the colour buttons
W button
to select a light colour corre-
7
sponding with the button.
Press the
button
the brightness level.
Press the
button
the brightness level.
There are 5 brightness level.
on the remote
6
and the
14
(Fig. A):
2
or the
12
to gradually increase
3
to gradually reduce
4
Color changing mode
FLASH: Press the FLASH button
select a colour change pattern alternating
between the basic colours red, green and
blue (RGB).
STROBE: Press the STROBE button
select a sophisticated colour changing
program:
- white light flashes 6 times, then ...
- RGB light colours alternate with a "rough"
transition, then ...
- 7-colour change with a "rough" transition,
then ...
- RGB light colours change with a "soft"
transition, then ...
- 7-colour change with a "soft" transition.
FADE: Press the FADE button
ate a colour change between 7 colours and
a "soft" transition.
SMOOTH: Press the SMOOTH button
to generate a colour change between
7 colours and a "rough" transition.
Repeatedly press the
ually increase the color changing speed.
Repeatedly press the
ually reduce the color changing speed.
There are 5 speeds level.
to
8
to
9
to gener-
10
11
button
to grad-
3
button
to grad-
4
GB/IE
19
Werbung
