Assembling The Fire Pit - tepro 1069 Bedienungsanleitung

Assembling the Fire pit

1. Unpack the ire pit
Unpack the ire pit and remove all
packaging ilms. Keep the packaging
material out of children's reach and
dispose of it properly when the ire pit
has been assembled. Follow the be-
low instructions and illustrations when
assembling the ire pit.
2. Connect the ire pit and support
legs
Use a wing bolt (S1) to attach one
support leg (B) under each corner of
ire pit (A).
S1
B
3. Attach the handle to the ire pit
screen
Attach screen handle (D) to ire pit
screen (E) using two Philips bolts (S2)
and two wing nuts (T1).
E
A
S2
D
T1
4. Place charcoal tray (G) in ire pit
(A)
A
5. Put the cooking grates and ire pit
screen in place
Place the two cooking grates (C) on
ire pit (A). Make sure that the cooking
grates snap well into the recesses on
the side walls. Place ire pit screen (E)
on the ire pit.
A
6. The assembly is complete
The ire pit assembly is now complete
and it is ready to be used. Keep hook
poker (F) ready to poke the ire or to
distribute the charcoal in the ire pit. If
necessary, disassemble the ire pit in a
reverse order.
Important: All bolts must
be fastened tight.
G
E
C
23