Agilent Technologies TPS-mobile 969-8400 Bedienungshandbuch Seite 100

ISTRUZIONI ORIGINALI
ELECTRICAL CONNECTIONS
Input Power Connector
The following figure shows the input power con-
nector.
CONNECTION TO MAIN
Gauge – Serial Line Connection
GAUGE CONNECTION
Gauge Connector
TPS-mobile is equipped with new generation
gauge reading card able to drive/read a Varian
Full Range Gauge FRG-700.
The FRG-700 Full Range Gauge is a combined
technologies gauge (Inverted Magnetron plus Pi-
rani Gauge).
FRG-700 measure from 5x10
-9
phere (3.8x10 Torr to atmosphere) and its tem-
perature range goes from 5°C to 55°C [41°-
131°F].
Pressure data is available on two independent
reading channels:
1. Serial communication line (Win 224)
Retention
Spring
Power cord
plug
NOTE
PN 969-8433 is already supplied with an
integrated power cord so you don't need
to perform this step.
Gauge port
Serial port
-9
mbar to atmos-
2. TMP controller display.
Pressure gauge can be connected/disconnected
from the TPS-mobile during normal operation.
FRG-700 gauge dimension
J2 – Serial Connector
This connector provides the connection for RS –
232 and serial line.
J2 Pin-out:
96/105
TECHNICAL INFORMATION
Gauge Connector
87-901-005-01(A)