Rosenbauer RTE AX B16 Betriebsanleitung Seite 91

Battery is fully charged.

► Disconnect rechargeable battery from external charger.
► Transport battery on the handle bar.
► Insert fully charged rechargeable battery in the support on the base
frame.
► Push the battery into the support on the base frame until it stops at the
end stop.
► Push handle bar 90° downwards.
Battery locks automatically.

High performance fan can be operated.

Charge retention on fire-fighting vehicle
The battery does not have to be taken out of the support for the charg-

ing process.
Do not operate the high performance fan in the fire-fighting vehicle.

It is a charge retention and not a quick charge.

Charging takes place with much less energy.

With a completely flat battery the charging time can be approx. 24

h.
► Properly support the high performance fan in the vehicle.
► Acuatet Main switch switch, to engage the high performance fan.
► Connect the high performance fan to the charge retention via the 24
volt Mag Code connection.
The charge retention starts automatically.

The Charge control pilot lamp on the LCS operation panel illumi-

nates.
Note the charge retention supply. Refer to the vehicle manufactur-

er's operation manual.
Battery is fully charged.

Service and cleaning
Service work
91 / 97
DE
EN
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12