Increase High Performance Fan Performance (Boost); Stop High Performance Fan; Disengage High Performance Fan - Rosenbauer Rte Ax B16 Betriebsanleitung

Operation
Operation
Deactivate lighting
20.4.6

Increase high performance fan performance (Boost)

20.4.7

Stop high performance fan

20.4.8

Disengage high performance fan

82 / 97
► Actuate Lighting function switch to deactivate the lighting.
The lighting of the high performance fan is deactivated.

The performance of the high performance fan can be increased to 120%
performance.
► Operate high performance fan.
See chapter "Start high performance fan".

► Actuate Increase performance (Boost) function switch to increase the
performance.
The performance of the high performance fan is increased to 120%.

The LEDs around the governor will flash.

► Actuate Increase performance (Boost) function switch again to adjust
the output performance.
The power of the high performance fan is adjusted to the output per-

formance.
Or
► Turn governor function switch anti-clockwise to decrease the speed of
the high performance fan.
The performance of the high performance fan is automatically set

to 100%.
Afterwards the performance of the high performance fan is re-

duced.
The performance of the high performance fan is adjusted to the select-

ed performance.
► Actuate Stop high performance fan function switch to stop the high per-
formance fan.
The high performance fan is stopped.

► Let the high performance fan cool down after operation.
► High performance fan can be loaded.
Do not stop the high performance fan with the Main switch switch.
► Stop high performance fan.
See chapter "Stop high performance fan".

► Actuate Main switch switch.
The power supply from the battery is disconnected.

The high performance fan is disengaged.
