Adjusting The Inclination Of The Nozzle Unit; Activate/Deactivate Lighting - Rosenbauer Rte Ax B16 Betriebsanleitung

Save speed
►
►
►


►

20.4.4

Adjusting the inclination of the nozzle unit

The inclination of the nozzle unit can be adjusted continuously during the
operation.

►
►
►

Tilt adjustment of the nozzle unit
20.4.5

Activate/deactivate lighting

The lighting on the high performance fan serves to optimally illuminate the
location of the high-performance fan.
Activate lighting
►

Turn governor function switch clockwise to increase the speed of the
high performance fan.
Turn governor function switch anti-clockwise to decrease the speed of
the high performance fan.
Actuate the lock key in the middle of the governor function switch to
save the current speed of the high performance fan as a preset.
The governor illuminates blue.
The current speed is saved as a preset speed.
Actuate the lock key in the middle of the Governor function switch to
adjust the preset speed of the high performance fan.
The set speed is approached.
Inclination range: -10° to +20°
Carefully open the tilt adjustment lock.
► Hold the nozzle unit by the tilt adjustment handle.
Set the desired inclination with the tilt adjustment handle.
Fix the tilt adjustment lock again.
The inclination of the nozzle unit is set.
Actuate Lighting function switch, to activate the lighting.
The lighting of the high performance fan is activated.
Operation
Operation
DE
EN
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
81 / 97