Rosenbauer RTE AX B16 Betriebsanleitung Seite 63

Danger of fatal or serious injury from electrical shock!
Water, fire fighting foam and metallic materials conduct electricity.
Do not aim turret or nozzle (extinguishing agent jet) toward high

voltage power lines or other high voltage electrical circuits.
Keep a safe distance to energized components under all

circumstances.
Do not use foam compound while fire fighting in electrical installations.

Do not park vehicles underneath or near overhead power lines, should

use caution.
Vehicles with roof structures as e.g. extendable light tower or turrets.

Do not load, unload or use metal ladders in areas where contact may

be made with overhead power lines or high voltage electric circuits.
Safety clearance of materials conducting electricity to overhead lines
Voltage
up to 1 kV
1 kV - 110 kV
110 kV - 220 kV
220 kV - 380 kV
Safety distance for fire fighting operations on low-voltage systems
Extinguishing agent
Extinguisher with dry powder
(ABC, BC)
Extinguisher with CO
2
Extinguisher with halon
Wet extinguisher, standpipe sys-
tem
Safety distance for fire fighting operations on low-voltage systems
Extinguishing agent
C-nozzle with water spray jet
C-nozzle with dry powder
C-nozzle with extinguishing gas
C-nozzle with full water jet
Safety clearance
1 m (3 ft)
3 m (9 ft)
4 m (13 ft)
5 m (16 ft)
(up to 1 kV)
Safety clearance
1 m (3 ft)
1 m (3 ft)
1 m (3 ft)
3 m (9 ft)
(up to 1 kV)
Safety clearance
1 m (3 ft)
1 m (3 ft)
1 m (3 ft)
5 m (16 ft)
Safety
Warnings
DE
EN
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
63 / 97