Carl F. Bucherer PATRAVI SCUBATEC Bedienungsanleitung Seite 3

PAT R AV I S C U B AT EC LEGEND
Date
Crown
Position 1: Winding
1 2 3
Position 2: Set date
Position 3: Set time
Rotatable bezel
Second
6 | E N G L I S H
YOUR WATCH
While its robust stainless steel case resists water pressure
during dives, its white finish and unusual design make the
Patravi ScubaTec a stylish companion wherever else in the
world the wearer's life takes him. High-level functionality,
sporting flair, compelling clarity and timeless elegance give
the final touch to this unique watch.
TECHNICAL DATA
Automatic movement CFB 1950
Depth of the
movement 4.6 mm / 4.8 mm
Diameter of the
movement 26.2 mm
Number of jewel
bearings 25 / 26
Water resistance * 200 m | 20 atm
* see the chapter on "Water resistance"
START THE WATCH SET TIME
The movement is wound by the motion of the In order for the date to properly move at
wrist when worn. When not worn, the watch midnight, the hour hand must intentionally
stops after approximately 38 hours and has be set to a.m. or p.m. based on the current
to be wound manually. time.
1 Rotating the crown in the 1
counter clockwise direction
will automatically release
it to position 1.
2 Manually wind the move- 2
ment by rotating the
crown at least 30 times in
the clockwise direction.
3
Pull the crown until it is
in position 3. The second
hand does not move.
Move the crown counter-
clockwise until the date
changes. Then deliberately
set the current time either
a.m. or p.m.
Push the crown back into
position 1. The second
hand is back in motion.
E N G L I S H | 7