Nonin 7500FO Bedienungsanleitung Seite 21

Operator Functions
Parameter
Recall Alarm Settings
Low %SpO Alarm Limit
2
Pulse High Alarm Limit
Pulse Low Alarm Limit
High %SpO Alarm Limit
2
Alarm Volume
Clear Memory
Confirm Memory Clear
Year
Month
Day
Hour
Minutes
Notes:
1) Both of these menu options are part of the memory clear command; "del" will be
displayed only if "yES" was selected as the setting for the "Clr" parameter.
2) These parameters are restored when Recall Alarm Settings is set to "yES." These are also
the settings displayed by Review Alarm Settings.
3) The low SpO 2 Alarm limit saved for recall cannot be lower than the current default for that
alarm limit. If it is, the default value will be used when alarm limits are restored.
Table 1: Limits Display Sequence
Parameter
(SpO 2 )
(Pulse Rate
Display
"rCL"
2,3
"02L"
2
"HH"
2
"HL"
2
"02H"
2
"adb"
1
"Clr"
1
"del"
"y"
"nn"
"d"
"h"
"nn"
Initial
Setting
Adjustment Range
Display)
"no"
"85" "Off", 50 to 95 by 1
"200" "Off", 75 to 275 by 5
"50" "Off", 30 to 110 by 5
"Off" "Off", 80 to 100 by 1
"Hi" "Off" or "Lo" or "Hi"
"no"
"no"
"00"
"00"
"00"
"00"
"00"
"yES" or "no"
"yES" or "no"
"yES" or "no"
0 to 99 by 1
0 to 12 by 1
1 to 31 by 1
0 to 23 by 1
0 to 59 by 1
17