Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation instructions
Convenient storage drawer
for washing machines
Levelling
For fault-free operation the convenient storage drawer must stand perpendicular to the appliance with all feet firmly on the
ground and the lock nuts 9 must be firmly tightened.
Tools: Combi spanner 19 mm 7 (supplied) and spirit level 8
Rear adjuster feet
Loosen lock nuts 9.
➤
Align convenient storage drawer vertically by turning the foot by hand.
➤
Tighten the lock nuts firmly.
➤
Front adjuster feet
Place the appliance in the floor mounting plate.
➤
Loosen lock nuts 9.
➤
Align convenient storage drawer vertically by turning the foot by hand.
➤
– Convenient storage drawer and appliance must be absolutely stable.
Tighten the lock nuts.
➤
Levelling check
Plug the appliance in at the mains or turn the wall switch on.
➤
– The appliance switches on.
If there are any items in the drum, remove them and then close the appliance door.
➤
Turn the water tap on.
➤
Depress the
,
and
➤
– The spinning sequence is carried out.
– After about 2 minutes the following appears in the display:
Check the stability of the appliance.
➤
– The appliance must stand perfectly vertically with all 4 feet firmly on the floor and must not wobble.
Press the
button to complete the initial set-up of the appliance.
➤
– The spinning sequence is finished. The appliance is then drained.
If necessary, repeat Levelling.
➤
buttons simultaneously for 3 seconds.
Check stability
12
J265.050-1
23.3.11 ZES
8
9
7
resp.
.
Werbung
