Technical Data - MPM MOD-38 Bedienungsanleitung

4. Periodically clean the rotating electric brush roller. The roll can be removed by pressing the
button (15) on top of the electric brush. After cleaning the roll, place it back in the electric
brush and lock the roll lock.
TROUBLESHOOTING
PROBLEM
The vacuum cleaner is not starting
Low suction power
Dust escapes to the outside of the vacuum
cleaner
Very fast pulsation of the status light

TECHNICAL DATA

Technical specifications are given on the product nameplate.
Maximum noise level: 69 dB
Caution! MPM agd S.A. reserves the right to technical changes.
PROPER DISPOSAL OF THE PRODUCT
Poland Marking on the product indicates that after the service-life of the product expires, it should not be disposed
with other type of municipal waste. Used equipment may have a negative impact on the environment
and health of people due to potentially containing hazardous substances, mixtures and components. Mixing
electric waste with other types of waste or disassembling those in an unprofessional manner may cause
a release of substances that are hazardous to the environment and health. Used equipment should be hand-
ed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste col-
lection points, the user should contact the municipal point of electric waste collection or used equipment processing de-
partment.
18
CAUSE
Battery discharged
Charging process in progress
Clogged brush
Dust container full
Clogged filters
Improperly assembled container
Damage to the vacuum cleaner's internal
circuit
(waste electrical and electronic equipment)
SOLUTION
Charge the battery
Wait until the process is completed
Remove the cause of clogging
Empty the dust container
Clean the filters
Assemble the container correctly
Contact an authorised service centre
charger vacuum
cleaner