Pin Assignment - SICK deTem2 Core IP69K Montageanleitung

MOUNTING INSTRUCTIONS
4.2 Mounting the stainless steel bracket
5

Pin assignment

10 M O U N T I N G I N S T R U C T I O N S | deTem2 Core IP69K, deTem4 Core IP69K
Mounting: C
Mounting the stainless steel bracket on the side and back
Mounting Description
method
On the side With the M8 screw through the stainless steel bracket to the machine or
profile frame. A screw nut or threaded hole is required on the machine or
profile frame.
On the back With the M8 screw through the stainless steel bracket to the machine or
profile frame. A screw nut or threaded hole is required on the machine or
profile frame.
Mounting: D
System connection (flying leads, 5-pin)
Wire color
Brown
White
Blue
Black
Gray
Sender
+24 V DC (voltage supply
input)
Reserved
0 V DC (voltage supply input)
Reserved
Not connected
Receiver
+24 V DC (voltage supply input)
OSSD1 (output signal switching
device 1)
0 V DC (voltage supply input)
OSSD2 (output signal switching
device 2)
Not connected
8021551/2017-08-18 | SICK
Subject to change without notice