Sundstrom SR 76-3 Gebrauchsanleitung Seite 19

Type K1 provides protection against ammonia
and certain amines, such as ethylene diamine.
Type Hg provides protection against mercury
vapour.
Type P3 provides protection against all types
of particles, both solid and liquid.
Type CO provides protection against carbon
monoxide.
4. To put the hood on
1) Tear up the aluminum bag at the red tear
marking. Fig.1.
2) Fold out the hood and remove the cover for
the visor and the absorber. Fig. 2.
3) Put the hood on.
Alt. 1. Pull it over your head from above. Fig. 3.
Alt. 2. Place the neckseal under your chin
and pull the hood back over your head.
Fig. 4. Suitable for persons with long hair
or wearing glasses.
4) If necessary, adjust the hood so that the mask
seals against your face and the neckseal
seals against your neck. Fig. 5.
5. Handling and storage
Important!
Handle your escape hood with the greatest
carefullness! Fig. 6.
Model S (Stationary)
Intended for stationary storage in a clean
and dry enviroment.Storage eg at the work-
place, in a cabinet or closet.
Model M (Mobile)
Intended to be carried during work eg attached
to the user's belt or stored in a work vehicle. To
maintain optimal function of your equipment,
you must handle it carefully and protect it from
blows, shocks and crushing injuries.
NOTE! Remember to keep the escape hood
easily accessible.
6. Inspection
Check that the aluminum bag not has been
damaged so that the vacuum has been lost.
The aluminum bag shall fit tight around the
escape hood. Fig 7.
1) Check the aluminum bag visually. Fig. 8.
If it is not possible to decide visually, proceed
to step 2.
2) Gently pull the aluminum bag. Fig. 9.
Model M should be examined without lifting the
bag from the nylon emergency bag.
In case of uncertainty - recheck the aluminum
bag on a calibrated scale. The weight may not
be increased more than maximum 2.0 grams
compared to the starting weight standing on
the aluminum bag.
Clamped,
exposed
for blows
or shocks
•
Model M
•
Model S
NOTE! When the escape hood has been clam-
ped or exposed for blows or shocks, the check
shall be performed first 8 hours after damage.
7. Shelf life
Temperature
-20 - +55 °C
8. Approvals
SR 76-3 Chem have been tested and approved
in two variants in accordance with Technical
Specifications based on EN 403:2004 exclud-
ing Clause 6.11, gas capacity against propenal
(acrolein), hydrogen chloride (HCl), hydrogen
cyanide (HCN) and carbon monoxide (CO).
• SR 76-3 S which is intended for stationary
storage.
• SR 76-3 M which is also approved as a
portable escape hood.
The filters of the hood have been tested
and approved in accordance with EN 14387
(gas filter) and EN 143:2000 (particle filter).
SR 76-3 Chem is CE labelled.
Before Every
each work 3rd
shift month
•
•
Relative Shelf life
humidity
< 90 % 10 year
19