Installation: General - Santec VTC-HDH359IRP/W Bedienungsanleitung

Installation: General

This camera is a compact camera in a weather-proof housing, IP-66.
It has been designed for video surveillance applications.
You will find the technical specifications at the end of this manual.
Camera mounting
Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. Ensure that the camera is safely installed by using only suitable screws.
Power supply and monitor impedance
Only use a stabilised power supply unit with sufficient wattage (see chapter "Specifications"
for recommended power supply). Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
The camera must not be opened!
All adjustments can be made from the outside.
Opening the camera housing will invalidate the warranty.
_________________________________________________________________________________
Bedienungsanleitung / User manual VTC-HDH359IRP/W / VTC-HDH359IRP/G
- 16 -