Installation Procedure - Santec VTC-HDH359IRP/W Bedienungsanleitung

Bedienungsanleitung / User manual VTC-HDH359IRP/W / VTC-HDH359IRP/G
Installation: Procedure
Picture 2
Picture 1
Picture 1:
To put the camera into the desired position, turn ring A carefully counter-clockwise. Pan and
tilt the camera until it is in the position you want it to be. Turn ring A clock-wise to fix the
camera module again.
Picture 2:
Adjust the zoom and focus to define the desired picture section and sharpness.
All adjustments can be made from the outside, i.e. all controllers are accessible from the
outside. Thus there is no need to open the camera housing (see warning note on previous
page).
Depending on the illumination, the built-in IR-LEDs automatically turn on or off. The range of
the IR-LEDs strongly depend on the location and on the surroundings.
Safety precautions for IR-LEDs:
Always keep a distance of > 1 m to prevent damages to your health. Never look directly into
the IR-LEDs to avoid eye damages.
_________________________________________________________________________________
- 17 -