Herunterladen Diese Seite drucken

EuroLite LED MS-3 Laser-LED-Effekt Bedienungsanleitung Seite 26

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Clean the front glass every two weeks from dust and smoke fluid residues.
There are no servicable parts inside the device. Never open the housing! Maintenance and service
operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
8. TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
LED power:
Laser classification:
Wavelength:
Laser-modules:
Beam angle:
Dimensions (LxWxH):
Weight:
Fuse:
Accessory:
EUROLITE TH-50 Theatre hook, silver
Safety bond 3x600mm up to 5kg, silver
Please note: Every information is subject to change without prior notice. 20.08.2010 ©
100-240 V AC, 50/60 Hz ~
35 W
5 W, 455 nm, blue
3B
650/532 nm
Red 100 mW, green 40 mW
approx. 55°
260 x 200 x 180 mm
1.7 kg
F 1 A, 250 V
No. 58000650
No. 58010310
26/26
00054554.DOC, Version 1.0

Werbung

loading