Acoustic Signals; Before First Use; Daily Use - Zanussi ZWF1430 Benutzerinformation

Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the buttons and
the indicator comes on/goes off.
Activate this option after you touch the button
: the buttons are locked (except for the
button ) .
This option stays active even when
you switch off the appliance.

Before first use

1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton at the
highest temperature without laundry.

Daily use

WARNING!
Refer to Safety chapters.
Loading the laundry
Open the water tap. Connect the mains plug to
the mains socket.
1. Pull the door handle to open the appliance
door.
2. Put the laundry in the drum, one item at a
time.
3. Shake the items before you put them in the
appliance.
Make sure not to put too much laundry in the
drum. Refer to max. loads indicated in
"Programme chart".
4. Close the door.
10
at the same time until

Acoustic signals

The acoustic signals operate when:
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic signals,
touch the buttons
for 4 seconds.
If you deactivate the acoustic
signals, they continue operate when
the appliance has a malfunction.
This removes all possible dirt from the drum and
the tub.
Using detergent and additives
and at the same time
CAUTION!
Make sure
that no
laundry
stays
between the
seal and the
door. There
is a risk of
water
leakage or
damage to
the laundry.
1. Measure out the
detergent and the
fabric conditioner.
2. Carefully close the
detergent drawer.
www.zanussi.com