Die Parameter, Ihre Default-Werte Und Ihre Bedeutung - IpCAS ipEther Handbuch

Die Parameter, ihre Default-Werte und ihre Bedeutung

Function
Control Port
Data Port (default el T net)
Data Port
Remote Port (GW Mode)
Command default
"?"
"mode 9600,8,n,1"
"tc57 no"
"tc57 1.1"
"tc57 1.2, fl"
"tc57 2, fl,hl"
"tc57 3, fl,hl"
"rxdtimeout 200"
"chartimeout 0"
"nomodemsignals 1"
"rs485halfduplex 0"
"echo 1"
"subnetmask
255.255.255.0"
"gateway 10.10.5.1"
"tcptimeout 1800"
"portdata 57137"
"remoteip 0.0.0.0"
"remoteport 57138"
"gwsource 0"
"gwidleto 120"
„T=3000 R=2FCC DSR=1
CTS=1 DCD=1 RI=0"
"uarterror 1"
"exit"
Änderungen vorbehalten
ipcas GmbH
TCP-Port
3497
23
57137
57138
Answer
"mode 115200,8,n,1"
"tc57 mode,fl,hl "
"rxdtimeout 200"
"chartimeout 0"
"nomodemsignals 0"
"rs485halfduplex 0"
"echo 1"
"subnetmask
255.255.255.0"
"gateway 10.10.5.1"
"tcptimeout 1800"
"portdata 57137"
"remoteip 0.0.0.0"
"remoteport 57138"
"gwsource 0"
"gwidleto 120"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
"ok" or "error"
---
---
---
ipEther232 V11.1
ipEther232.Telnet
Version 10.6
Description
Get the current UART Mode.
Get the current TC57 Mode.
Get the current RXD-Timeout.
Get the current Character Distance.
Get the current modem Mode.
Get the current Duplex Mode.
Get the current Echo Flag.
Get the current Subnet Mask.
Get the current Gateway.
Get the value of connection life Timeout
Get the current Port Data.
Get the current Remote IP (GW Mode).
Get the current Remote Port(GWMode).
Get the current QW Source (GWMode).
Get the current QW Idle Timeout (GW Mode).
Sets the UART Mode
Disables the TC57
Sets the TC57 Mode to Format 1.1
Sets the TC57 Mode to Format 1.2
Sets the TC57 Mode to Format 2
Sets the TC57 Mode to Format 3
Sets the RXDTimeout. (10, 20, ...30000ms)
Sets the Character Distance.(0, 10,...250ms)
1=Ignores the Modem signals, 0=Uses the
Modem.
1=Full, 0=Half duplex mode.
1=Echo enable, 0=Echo disable.
Sets the subnet mask.
Sets the gateway.
Set the time out for TCP connection.
(60...4294967294sec.)
Set the data port number. (0 ... 65535)
Set the remote IP address.
0.0.0.0 - Telnet server mode.
x.x.x.x – Telnet client mode.
Set the remote port number. (0 ... 65535)
Sets the condition to open a TCP connection
in Gateway mode.
Sets Time out. This parameter is active when
gwsource=0. (0... 65535sec.)
Receives the ipEther.Telnet Status.
Receives the UART status.
Exit from Command Telnet Terminal.
Stand 24.08.05
Seite 47 von 152