Playback; Playing A Usb Device - Sony DSX-A400BT Bedienungsanleitung

Setting clock time (CT)
The CT data from the RDS transmission sets the
clock.
1
Set [SET CT-ON] in [SET GENERAL]
(page 18).
12
GB

Playback

Playing a USB Device

In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on an iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 20) or visit the support site on
the back cover.
MSC (Mass Storage Class) and MTP (Media Transfer
Protocol) type USB devices (such as a USB flash
drive, digital media player, Android smartphone)
compliant with the USB standard can be used.
Depending on the digital media player or Android
smartphone, setting the USB connection mode to
MTP is required.
Notes
 For details on the compatibility of your USB device,
visit the support site on the back cover.
 Playback of the following files is not supported.
MP3/WMA/FLAC:
 copyright-protected files
 DRM (Digital Rights Management) files
 Multi-channel audio files
MP3/WMA:
 lossless compression files
1
Connect a USB device to the USB port
(page 9).
Playback starts.
If a device is already connected, to start
playback, press SRC to select [USB] ([IPD]
appears in the display when the iPod is
recognized).
2
Adjust the volume on this unit.
To stop playback
Press and hold OFF for 1 second.
To remove the device
Stop playback, then remove the device.