Digital Programmer; First Use; Using The Oven - Smeg SO4902M1N Bedienungsanleitung

Digital programmer

The parameters and values for the currently
selected function will be indicated on the
display. To use it, simply turn the functions and
temperature knobs and/or press the buttons on
the lower part of the display, depending on the
operations to be performed by the appliance.

First use

If the time is not set, the oven will not
switch on.
On the first use, or after a long power failure,
and the
appliance display. To be able to start any
cooking function, the current time must be set.
Time setting
1. Press the button.
2. Turn the temperature knob to select the time
format to display (
When the version
the display shows
(afternoon).
3. Press the button to confirm the
modification and go on to adjust the time.
4. Turn the temperature knob to set the current
time.
54 - USE
button flash on the
or
is selected,
(morning) or
5. Press the
and go to the selection of minutes.
6. Turn the temperature knob to select the
minutes of the current time.
7. Press the
It may become necessary to change the
current time, for example for daylight
saving time.
When the current time is visible, after 2
minutes from the last knob operation it is
displayed with low brightness.
To cancel the operation, turn the
function knob or hold down the button
Modifying the time
1. In the main menu, hold down the
for a few seconds.
2. Modify the time as described in point 2 in
the previous chapter.

Using the oven

See General safety instructions.
Microwave cooking
Given that they penetrate directly into
).
the food, microwaves allow cooking to
take place in a very short period of time
and with a considerable saving of
energy. They are suitable for cooking
without fat and also for defrosting and
re-heating food while maintaining its
original appearance and fragrance.
button to set the current time
button to confirm.
for a few seconds.
91477A641/B
button