Repair And Maintenance - SYMA X200 Bedienungsanleitung

12. To ensure the electromagnetic environment requirement of the aviation radio
(station), using remote controls in the zone, which is in a radius of about 5000m zones
from the circle center of the airport runway, is forbidden. All users also should abide by
the regulation of the radio set forth by government and regulatory agencies including the
duration and area.
13. Only use the recommended transformer for the model, and the transformer is not a
toy. Check the cord, plug, enclosure, and other parts of the transformer regularly. If any
damages have been discovered, please immediately stop using it until it was completely
repaired.
14. Never look steadily at the laser beam since the laser radiation.
15. NOTE: Assemble the drone under adult supervision.
16. The pilot is responsible for the safe operation, safe distance from uninvolved persons
and property on the ground, and from other airspace users and shall never fly the drone
above crowds (> 12 persons).
17. The packing has to be kept since it contains important information.
18. It is strongly recommended to fly in areas without airflow. Do not fly in areas with an
air conditioner/electric fan or table lamp, or other electrical equipment which may be
easily damaged.
19. Use only the supplied charging cable.
20. Chargers used with the drone should be examined regularly, such as the cord, plug,
enclosures, and other parts. If any damages are found, please stop using it unless it is
repaired or replaced.
21. Do not touch the rotating rotor, avoiding loose clothing or hair being caught in the
rotor, and do not fly near the face.

Repair and Maintenance

1. Use a dry and soft cloth to clean the product.
2. Do not expose the product to extreme heat or direct sunlight.
3. Do not immerse the product in water as this may damage the electrical components.
4. Please check the blades, motors, and batteries regularly. If any damage is found, please
stop using it unless it is repaired or replaced.
3