One key take off/land
1. When the drone is in standby mode, press the one key take off/land button, the
drone will automatically take off and hover at a height of 1.5 meters.
2. When the drone is in flight, press the one key take off/land button and the drone
will automatically land on the ground.
Altitude hold
When releasing the left joystick (throttle) after controlling the aircraft to
ascend/descend, the drone will continue to hover at the current height.
4.5 Protection Mechanism
Undervoltage protection
Overcurrent protection
When the two indicators on the nose of the drone begin to flash, it
means that the power of the drone is low. At this time, please
control the drone to return.
If the drone's blades collide with another object or become stuck,
the drone will engage the overcurrent protection mechanism.
14