Battery Installation; Flight Guide; Flight Preparation And Turning The Drone On/Off - SYMA X200 Bedienungsanleitung

3.4 Battery Installation

Remote control battery installation: Open the battery cover on the back of the remote
control, and install 2*AAA batteries correctly according to the electrode instructions of the
battery box(battery needs to be purchased separately)
2x1.5V"AAA"batteries
Note:
!
1. When installing the battery, please make sure that the polarity of the battery matches the
polarity of the battery box.
2. Do not use new and old batteries together.
3. Do not use different types of batteries together.
4. Do not use rechargeable batteries.

4.0 Flight Guide

4.1 Flight Preparation and Turning the Drone On/Off
Pair the remote control with the drone
① Switch on the remote control, remote
control indicator light flashes slowly.
③ Push the left
throttle up.
④ Pull the throttle
down and reset
it to the center.
Note:
!
After you switch on the remote control, the indicator will flash quickly, which means that the
remote control is waiting to be paired with the drone.
1
3
4
② Switch on the drone, drone indicator light
flashes from rapidly to slowly
⑤ Both indicator lights turn solid
when the pairing is successful.
2
8