Drum cleaning
Rust left by metal objects inside the drum is immediately removed with chlorine-free cleaning agents. Never
use wire. Do not put clothes in the washing machine while the drum is being cleaned.
Cleaning the inlet filter
•
Decreasing water flow is a sign that the filter needs to be
cleaned.
1.
Turn off the tap and remove the supply hose.
2.
Clean the filter with a brush.
3.
Unscrew the water supply hose from the back of the
machine. Pull the filter out with the pliers.
4.
For example, use a toothbrush to clean it.
5.
Reinstall the filter on the water inlet and reconnect the
inlet hose.
6.
To ensure normal operation of the appliance, clean the
inlet filter every 3 months.
Cleaning the detergent dispenser
1.
Press the arrow on the detergent dispenser cover inside the detergent dispenser.
2.
Lift the clip up, remove the detergent dispenser cover and wash all the grooves with water.
3.
Replace the fabric softener dispenser cover and insert the dispenser back in.
Warning:
•
Do not use abrasive or corrosive products to clean plastic parts.
•
To ensure normal operation of the appliance, clean the detergent dispenser every 3 months.
Cleaning the drain pump filter
Warning:
•
Make sure the washing machine has completed
the wash cycle and is empty. Before cleaning
the drain pump filter, switch off the washing
machine and unplug it from the power outlet.
•
Watch out for the hot water. Let the water cool.
Danger of scalding!
•
Clean the filter regularly every 3 months to
ensure normal operation of the appliance.
1.
Open the bottom cap.
2.
Open the filter by turning it counterclockwise.
3.
Remove dirt and foreign objects.
4.
Close the bottom cap.
19