Bosch BRC3600 Originalbetriebsanleitung Seite 16

English – 4
Switching bike lights on/off
Check that your bike lights are working correctly before
every use.
To switch on the bike lights, press the bicycle
lights (10) button for more than 1 s.
You can use the reduce brightness (11) and the increase
brightness (12) buttons to control the brightness of the
LEDs on the operating unit.
Switching the Walk Assistance On and Off
The walk assistance makes it easier to push your eBike. The
maximum speed of the walk assistance is 4 km/h. The manu-
facturer can adjust the default so that it is lower and, if ne-
cessary, it can also be adjusted by the bicycle retailer.
The push assistance function must only be used when
u
pushing the eBike. There is a risk of injury if the wheels
of the eBike are not in contact with the ground while using
the push assistance.
If the selected gear is too high, the eBike's drive unit
u
cannot move and the roll-away lock cannot engage.
To start walk assistance, press the walk assistance (9) but-
ton for more than 1 s and keep it pressed. The battery
charge indicator of the eBike battery (3) goes out and a
white moving light in the direction of travel shows that it is
ready.
To activate walk assistance, one of the following actions
must occur within the next 10 s:
– Push the eBike forwards.
– Push the eBike backwards.
– Perform a sideways tilting movement with the eBike.
After activation, the drive begins to push and the continu-
ously filling white bars change colour to ice-blue.
If you release the walk assistance (9) button, walk assist-
ance is stopped. You can reactivate walk assistance within
10 s by pressing the walk assistance (9) button.
If you do not reactivate walk assistance within 10 s, walk as-
sistance automatically switches off.
Walk assistance is always ended if:
– The rear wheel jams,
– The bicycle cannot move over ridges,
– A body part is blocking the bike crank,
– An obstacle continues to turn the crank,
– You start pedalling,
– The increase assistance level +/bicycle lights (10) button
or on/off button (2) is pressed.
Walk assistance has a roll-away lock, i.e. even after walk as-
sistance has been used, rolling backwards is actively curbed
by the drive for a few seconds, and you cannot push the
eBike backwards or can only do so with difficulty.
The roll-away lock is immediately deactivated by pressing
the increase assistance level +/bicycle lights (10) button.
The push assistance function is subject to local regulations;
the way it works may therefore differ from the description
above, or the function may even be deactivated completely.
0 275 007 3RL | (21.02.2023)
ABS – anti-lock braking system (optional)
If the eBike is equipped with a Bosch eBike ABS from the
smart system system generation, the ABS LED (4) lights up
when the eBike system starts.
After moving off, the ABS internally checks its functionality
and the ABS LED goes off.
In the event of a fault, the ABS LED (4) lights up, together
with the orange flashing assistance level LED (5). You can
acknowledge the error with the select button (7); the flash-
ing assistance level LED (5) goes out. While the ABS LED (4)
is lit up, the ABS is not in operation.
For details on the ABS and how it works, please refer to the
ABS operating instructions.
Establishing a smartphone connection
In order to be able to use the following eBike functions, a
smartphone with the eBike Flow app is required.
Connection to the app occurs via a Bluetooth® connection.
Switch the eBike on and do not ride.
Begin Bluetooth® pairing by pressing and holding (> 3 s) the
on/off button (2). Release the on/off button (2) as soon as
the topmost bar on the battery charge indicator of the eBike
battery (3) shows the pairing process by flashing blue.
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register and
log into the eBike Flow app.
To record activities, you must consent to the storage of your
location data in the app. Without this, your activities cannot
be recorded in the app. For location data to be recorded,
you must be logged in as the user.
eBike Lock
The <eBike Lock> can be activated for each user via
the eBike Flow app. In the process, a key for unlocking the
eBike is saved on the smartphone.
The <eBike Lock> is automatically enabled in the following
cases:
– The eBike is switched off via the operating unit
– The eBike is switched off automatically
If the eBike is switched on and the smartphone is connected
to the eBike via Bluetooth®, the eBike will be unlocked.
<eBike Lock> is linked to your user account.
If you lose your smartphone, you can log in to your user ac-
count on the eBike Flow app using another smartphone and
unlock then the eBike.
Warning! If you select a setting in the app that could have
negative consequences in combination with the <eBike
Lock> (e.g. deleting your eBike or user account), you will be
shown warning messages beforehand. Please read through
these thoroughly and adhere to the warnings that are is-
sued (e.g. before deleting your eBike or user account).
Setting Up the <eBike Lock>
In order to be able to set up the <eBike Lock>, the following
conditions must be fulfilled:
Bosch eBike Systems