Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before first Use
Remove the ash vacuum out of the packing and check all parts for
damage in transit. Dispose of packaging materials or store them out of
reach of children. Plastic bags etc. may become a deadly toy for children.
The ash vacuum is designed for removing cold (amber-free) ashes from
fireplaces and for sucking coarse dirt. Any other use not described in this
manual is considered as inappropriate use and may damage the ash
vacuum.
Preparation
1. Attach the wheels to the ash tank if they are desired.
2. Open the ash vacuum and remove all accessories. Insert the alumini-
um tube (6) into the suction hose (10).
3. Insert the suction hose (10) into the provided suction flange (4) of the
ash tank (9). To lock the suction hose turn clockwise.
Attention: In order not to damage the suction hose (10) do not turn in
opposite direction and do not bend the hose on the hose connection!
4. Place the filter (11) tightly onto the motor on the top part and secure it
with the wing nut.
Before switching on the ash vacuum make sure the filter is not dam-
aged.
5. Place the top part on the ash tank (9) and lock the lid
with the clamps (8). The ash vacuum is now ready for
use.
Make sure the suction opening of the aluminium tube
(6) is not blocked. A blockage may damage the appli-
ance.
Switching ON and OFF
1. Switch on the ash vacuum by pressing the ON/OFF button (2).
2. To switch off the appliance, press the button again. Always pull the
power plug from mains when not using the appliance.
When using the suction hose make sure the hose is not bent. This will
damage the suction hose and the ash vacuum will lose its suction pow-
er. The suction hose must be placed that way so that it forms a natural
curve while sucking.
Ope ra t ion
14
Werbung
