Specifications - Panasonic GP-MF130 Bedienungs Und Wartungsanweisungen

SPECIFICATIONS

Pick-up Device :
Image Size :
Synchronization :
External Reset :
Horizontal Resolution :
Minimum Illumination :
Signal to Noise Ratio:
Gamma :
Gain Selection :
Electronic Shutter :
Lens Mount :
Inter Line Transfer type CCD with 752 (H) x 582 (V) pixels.
1/3" (6.00 (H) x 4.96 (V) mm)
2 : 1 interlace 1-line interlace (Frame accumulation)
2 : 1 interlace 2-line interlace (Field accumulation)
Internal or External (Selectable Automatically)
Internal : Built-in sync generator
External : 4.0 V[p-p]/75 Ω Horizontal drive and Vertical drive pulses
for 2 : 1 interlace
External signal (4.0 V[p-p]/75 Ω, negative) supplied to EXT VD IN con-
nector can be used as reset signal
560 lines at center
1.0 lx (0.1 foot-candles), (F1.4, Manual Gain Max (+6 dB), γ OFF, 2 : 1
interlace, without shutter)
54 dB Typical (Manual Gain OFF (0 dB), γ OFF, 2:1 interlace without
shutter)
1.0
0 - 6 dB (Adjustable by Manual Gain Control on rear panel)
10-step (1/120 s to 1/96 000 s)
C-Mount
- 11 -