Werbung
Verfügbare Sprachen
Verfügbare Sprachen
RADIO RECEIVER MODULE:
IR WINDOW
1
Sends infrared signals to the transmitter for
frequency synchronisation.
POWER
2
On/Off switch and volume control.
ASC
3
Select the frequency for the transmission on the
receiver and then press the ASC-button to synchro-
nise transmitter and receiver. Align the IR window
(infrared interface) of the microphone with the IR
window of the receiver. (Synchronisation with Belt
Pack Transmitter: Press the "ASC" button on the
transmitter and the receiver in order to enable the
synchronisation.)
MUTE LEVEL
4
Squelch setting on the receiver:
The squelch function is used for noise reduction,
if the transmitter is turned off or the receiver does
not receive a sufficiently strong signal from the
transmitter.
The squelch value (mute level) of the receiver is
already correctly adjusted at the factory. Normally,
no further adjustment is required.
However, should a readjustment be necessary, set
the squelch value to a level that does not generate
any noise in the receiver when the transmitter is
switched off.
12
8
7
7
6 5
4
3
2
AF LED
5
Indicates whether or not the module receives an
audio signal.
RF LED
6
Indicates whether or not the module receives a
radio frequency signal (RF signal).
UP/DOWN
7
Select channel 1 - 16
LED DISPLAY
8
Channel number display
1
Werbung
