Inhaltsverzeichnis
Werbung
VALVES AND VALVE SPRINGS
ASSEMBLY AND INSTALLATION
1. Apply:
2. Install:
NOTE:
Make sure that each valve is installed in its
original place, also referring to the embossed
mark as follows.
Install the valve springs with the larger pitch
a facing upwards.
b Smaller pitch
3. Install:
NOTE:
While compressing the valve spring with a
valve spring compressor and attachment 1
install the valve cotters.
4. To secure the valve cotters onto the
CAUTION:
Hitting the valve tip with excessive force
could damage the valve.
4 - 20
Molybdenum disulfide oil
(onto the valve stem and valve stem
seal)
Valve spring seats
Valves
Valve springs
Valve spring retainers
Intake: "G"
Exhaust "L"
Valve cotters
Valve spring compressor:
YM-01253/90890-01253
valve stem, lightly tap the valve tip with a
piece of wood.
ENG
New
Werbung
Inhaltsverzeichnis
