voestalpine bohler welding URANOS 2200 TLH Betriebsanleitung Seite 36

Save all the current settings on the selected program by
pressing button (3)
Introduce a description of the program.
- Select the required letter by rotating the encoder.
- Store the selected letter by pressing the encoder.
- Cancel the last letter by pressing button (1)
Cancel the operation by pressing button (2)
Confirm the operation by pressing button (3)
The storage of a new program on an already occupied
memory location requires cancellation of the memory
location by an obligatory procedure.
Cancel the operation by pressing button (2)
Remove the selected program by pressing button (1)
.
Resume the storage procedure.
3 Program retrieval
Retrieve the 1st program available by pressing button
.
36
.
.
.
.
Select the required program by pressing button
Select the required program by rotating the encoder.
Only the memories location occupied by a program are
retrieved, while the empty ones are automatically skipped.
4 Program cancellation
Enter the "Program cancellation" screen by pressing the
button for at least 1 seconds.
Select the required program by rotating the encoder.
Delete the selected program by pressing button (1)
.
Confirm the operation by pressing button (2)
Confirm the operation by pressing button (1)
Cancel the operation by pressing button (2)
3.6 Interface personalisation
1 7 segment display personalisation
Enter set-up by pressing the encoder button for at least
5 seconds.
.
.
.
.