General Safety Instructions - LaserLiner PrecisionPlane-Laser 3D Pro Bedienungsanleitung

Read the operating instructions and the enclosed brochure „ Guarantee
!
and additional notices" completely. Follow the instructions they
contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on w ith it.
Function / Application
Three-dimensional laser w ith three red 360° laser circles
and adaptable metal base
– Additional slope function for aligning inclines
– M otorised adjustment up to ± 2°
– Out-Off-Level: is indicated by optical signals w hen the unit is outside its
self-levelling range.
– Adaptable metal base for exact laser line positioning w ith the rotary casing
w ith vernier adjustment mechanism.
– Automatic levelling range 2°, accuracy 0.15 mm / m

General safety instructions

– The device must only be used in accordance w ith its intended purpose
and w ithin the scope of the specifications.
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam tow ards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move aw ay from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered w hilst laser devices
are in operation.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
PrecisionPlane-Laser 3D Pro
13
EN