Listo RDL160-55hib1 Bedienungsanleitung Seite 13

7. Unscrew the two special flange selftapping screws which are used for fixing the
middle hinge part, then remove the middle hinge part that hold the lower door in
place.
Note: When removing the door, watch for washer(s) between the lower hinge and the
bottom of the lower door that may stick to the door. Do not lose.
8. Place the lower door on a smooth surface with its panel upwards. Loose screw
and part , then lnstall them to the left side and tighten securely.
9. Change screw hole covers on middle cover plate from left to right (as shown in
figure below).
V.1.0
screw hole covers
13
Stop block
Self-tapping screw
screw hole covers