Reversing The Door - Listo Rdl160-55Hib1 Bedienungsanleitung

REVERSING THE DOOR

The side at which the door opens can be changed, from the right side (as supplied) to
the left side, if required.
Warning: When reversing the door, the appliance must not be connected to the
mains. Ensure that the plug is removed from the mains socket.
Tools you will need
• Not provided
8mm socket Thin-blade Cross-shaped Monkey
8mm wrench
wrench screwdriver screwdriver wrench
• Additional parts (in the plastic bag)
Left Hinge Cover
Note: If required you may lay the refrigerator on its back in order to gain access
to the base, you should rest it on soft foam packaging or similar material to avoid
damaging the backboard of the refrigerator. To reverse the door, the following steps
are generally recommended.
1. Stand the refrigerator upright. Open the upper door to take out all door racks (to
avoid damage) and then close the door.
Remove the door shelf
10 V.1.0