Operation - SOLAC PP7270 Gebrauchsanleitung

PP7270.book Page 15 Wednesday, July 16, 2008 9:19 AM

The higher the temperature, the faster and more professional the results.

When used at the maximum temperature, we do not recommend using
the straightener more than once on the same lock of hair.

Operation

1 Place the straightener on a flat, heat-resistant surface.
2 Plug it in.
3 Press the on button (1), and the digital screen will light up (2) in red,
showing the straightener is operating, (Fig. 1).
4 Choose the temperature you need using the + and - buttons (3), (Fig. 2).
5 While it is heating up, the temperature indicator will move.
6 When the chosen temperature is reached, the iron will make a sound,
the screen will go blue and the temperature indicator will stop moving
(fig.3).

The straightener will maintain the preselected temperature constant.
To straighten (Fig. 4)
1 Take a lock of hair (approximately 4 cm wide) and place it between the
plates. Close them and slide the straightener down the lock of hair from
the roots to the tips.
2 Repeat this operation until all your hair is completely straight.

For best results, we recommend you begin with the lower layers of hair
and continue with the top layers.
To curl tips outwards (Fig. 5)
1 Place the tip of the lock of hair between the plates and close them.
2 Turn the straightener outwards as if it were a hairbrush.
3 Keep it in this position for a few seconds.
To curl tips inwards (Fig. 6)
1 Place the tip of the lock of hair between the plates and close them.
2 Turn the straightener inwards as if it were a hairbrush.
3 Keep it in this position for a few seconds.
Use
en
15