Device Description; Using The Device - Beurer FS 50 Gebrauchsanleitung

!
• Stop using it with oils and herbs if skin irritation or anything else unusual occurs in the skin.
• You should also stop using it if you develop pain or feel unwell and you should consult your
doctor.
• Do not use the device under covers, towels etc.
• Do not change the accessories while in use as there is a risk of burns if hot liquids spill.
• caution: the device does not switch off automatically even when the water has evaporated
completely from the reservoir.
• If the device falls into water by accident, unplug it immediately. Have the device checked by
a qualified electrician before using it again.
!
4. Important instructions for after use
• After use, switch off the device and unplug it.
• Never unplug it with wet hands or by pulling on the cable.
• Empty any remaining liquid from the side of the vaporizer. Ensure that no liquids can get into
the device through the switch, the cable or the bottom of the device.
• The device should be cleaned after use to avoid the collection of grease and other residues.
This ensures optimal operation and prolongs the working life of the device.
• Let the device cool down fully before operating it again.
• If you have any further questions about using our devices, please consult your dealer or the
Customer Service department.

5. Device description

1. Facial sauna steam mask for the entire face
2. Water container
3. Basic unit
4. Maximum filling level
5. Rotary switch
6. Indicator light
7. Aroma attachment
8. Facial sauna steam mask for nose and mouth
9. Steam valve (reverse)
10. Steam disc
11. Measuring cup

6. Using the device

This device is intended only for use on the human face.
Using the facial sauna provides an ideal basis for cosmetic facial care. The skin of your face is pre-
pared optimally for further treatments such as deep cleansing, moisturising, face masks etc.
Beauty salons very often begin facial treatments with a steam treatment. The invigorating steam
increases the skin circulation, the pores are opened and impurities are removed more easily.
You can thus provide the perfect basis for every kind of facial care. The skincare products pen-
etrate deep into the skin through the opened pores, thus optimising their action.
6.1 Operation
Place the device on a flat, firm, level and water-insensitive surface or on a table.
Use the measuring cup to fill the device's water container with water. Do not exceed the maxi-
mum filling level.
You should never fill the container directly under running water but only use the measuring cup
that comes with it. The water volume at maximum filling level is enough for about 20 minutes use.
Do not use oils, herbs or other aromatic substances as a substitute for water but only added to
adequate water filling.
1
7
10
2
4
6
5
3
7
8
9
11