Beurer EC 70 SafePlus Gebrauchsanweisung Seite 37

7.5 Switching the emergency wristband on and off
1. To switch on the emergency wristband, press the ON/OFF/emergency button
4 times in quick succession. The LEDs
band also vibrates briefly. The emergency wristband is ready for use as soon as
the flashing pattern and vibration have ended. When used for the first time or when
the battery is completely empty, the emergency wristband will only switch on when
placed in the charger
Press 4 times
2. To switch off the emergency wristband again, press the ON/OFF/emergency but-
ton again 4 times in quick succession. The LEDs
3
The emergency wristband also vibrates briefly. The emergency wristband is now
switched off.
Press 4 times
To check if the emergency wristband is on, press the ON/OFF/emergency
button
If the battery level is shown, the emergency wristband is on. If not, you
must switch on the emergency wristband or charge it if the battery is flat.
provided.
10
briefly.
3
start to flash white. The emergency wrist-
2
Flashing white
Flashing white
37
Vibration
start to flash white again.
2
Vibration
3