Beurer EC 70 SafePlus Gebrauchsanweisung Seite 34

7.2 Charging the battery
1. Connect the charging cable
2. Connect the other end of the charging cable
3. Insert the mains plug
4. Connect the emergency wristband to the charger
round you place the emergency wristband in the charger.
5. After connecting the mains plug
should confirm the charging process and indicate the charging status. A full charge
of the battery takes up to 2 hours.
6. Once the device has been charged to 100%, you will see 4 solid white LEDs
the wristband has been fully charged, remove the charger
store them carefully.
To check the battery level manually, briefly press the ON/OFF/emergency button
once, as explained in more detail in chapter "7.9 Battery level indicator". The battery
will last up to 21 days if there is no activity and no events occur where a fall needs
to be evaluated. As soon as the battery level falls below 30%, the emergency wrist-
band will issue an initial, automatic battery warning. A further warning will be issued
at 10%. The emergency wristband also vibrates three times in quick succession and
the LEDs indicate the battery level.
2
When charging, the device automatically searches for and installs availa-
ble updates. This ensures that you always have the latest software version
on your emergency wristband.
to the charger
13
14 into a suitable socket.
to the mains power supply, a white flashing pattern
14
34
.
10
to the supplied mains plug
13
. It doesn't matter which way
10
10
.
14
. Once
2
and accessories and
3